ATP Bioluminescence for Rapid Detection of Microbial Contamination

Jozsef Farkas

Bioluminescent ATP Assay

 

ATP (adenosine triphosphate) is the chemical compound in which energy is stored in all living cells. In the ATP-luminometric test the firefly enzyme (luciferase) in the presence of its substrate, luciferin, oxygen and magnesium ions catalyzes conversion of chemical energy of ATP into light through oxidation-reduction reaction. The quantity of light generated is directly proportional to the amount of ATP present, thus, the light units can be used to estimate the biomass of cells in a sample. With state of the art equipment, and highly purified reagents, it is possible to detect amounts of ATP corresponding to approximately 100 bacterial cells, although in practice it is usually nearer to 103-104. Quantification of intracellular microbial ATP can be conveniently accomplished using rapid and simplified extraction and assay procedures. The light emitted by this process can be monitored by a variety of luminometers. Supplying companies provide customers with test kits with all necessary reagents. The reagents are injected into the instruments and readout is reported in relative light units (RLUs). By knowing the number of microorganisms responsible for generating known RLUs, one can estimate the number of microorganisms in the (food) sample. The ATP method has been used to evaluate microbial loads in e.g. meat, milk, water, fruit juice samples in a winery and a brewery, and sweeteners and syrups (FUNG, 1997). Much interest has been developed also in using ATP estimation not for total viable cell counts but as a sanitation check including also the verification of somatic cells presence on a surface.

This version of the ATP bioluminescence method based on detecting all ATP on a surface provides an indication of cleanliness detecting also ATP of somatic origin that the traditional plate count method does not detect, instead of only of microbial origin (CHEN, 2000; ILLSLEY et al., 2000; QUINN et al., 2002; PAEZ et al., 2003). Samples for assessing surface hygiene by this method can be obtained by swabbing the surface, or by taking aliquots of the rinse water (KISS et al., 1999). Reading of the bio-luminometers may be assessed as "acceptable" or "unacceptable". The procedure can be easily performed by almost anyone, with little training. The preparation and measuring time takes only several minutes. Portable luminometer reading units have test swabs with pre-packaged reagents. The user swabs the surface to be tested, activates the swab by placing it into the solution of reagents then inserts it into the chamber of the luminometer to obtain the measurement.

 

ATP Bioluminescence for Rapid Detection of Microbial Contamination:  Created on December 3rd, 2007.  Last Modified on December 3rd, 2007

0 Comments

You must be logged in to comment:

Forgot your password?   Don't have an account?

About Jozsef Farkas

Prof. Dr. József Farkas is President of the Complex Committee on Food Science of the Hungarian Academy of Sciences, Budapest, Hungary.

CIRIscience.org Account Registration

Fill in the form below for basic site access (commenting, etc).
Looking for more? Become a CIRI Member...