Vapor-based fumigant systems for disinfection of health care surfaces and spaces is an evolving technology. A new system (AsepticSure) uses an ozone-based process to create a highly reactive oxidative vapor with broad and high-level antimicrobial properties.
Ozone gas at 50-500 ppm was combined with 3% hydrogen peroxide vapor in a test chamber and upscaled in rooms measuring 82 m3 and 90 m3 in area. Test organisms included methicillin-resistant Staphylococcus aureus, vancomycin-resistant enterococcus, Escherichia coli, Pseudomonas aeruginosa, Clostridium difficile, and Bacillus subtilis spores dried onto steel discs or cotton gauze pads.
The combination of 80-ppm ozone with 1% hydrogen peroxide vapor achieved a very high level of disinfection, with a ≥6 log10 reduction in the bacteria and spores tested on steel discs and MRSA tested on cotton gauze during a 30- to 90-minute exposure. The entire system was scalable such that it achieved the same high level of disinfection in both the 81-m3 and 90-m3 rooms in 60-90 minutes.
The ozone hydrogen peroxide vapor system provides a very high level of disinfection of steel and gauze surfaces against health care-associated bacterial pathogens. The system is an advanced oxidative process providing a rapid and effective means of disinfecting health care surfaces and spaces.
Dick Zoutman, MD
Michael Shannon, MD, MSc
Arkady Mandel, MD, PhD, DSc
Published online 06 May 2011.
Conflict of interest: Research funded by Medizone International Inc.
© 2011 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc All rights reserved.
Effectiveness of a Novel Ozone-based System for the Rapid High-level Disinfection of Health Care Spaces and Surfaces: Created on December 22nd, 2011. Last Modified on December 22nd, 2011
Fill in the form below for basic site access (commenting, etc).
Looking for more? Become a CIRI Member...